Login (DCU Staff Only)
Login (DCU Staff Only)

DORAS | DCU Research Repository

Explore open access research and scholarly works from DCU

Advanced Search

Development and characterisation of nanotemplated carbon monoliths in analytical chemistry

He, Xiaoyun (2014) Development and characterisation of nanotemplated carbon monoliths in analytical chemistry. PhD thesis, Dublin City University.

Abstract
A novel approach has been developed to fabricate a hierarchical nanotemplated carbon monolithic rod (NTCM) by using C60-fullerene modified silica fullerene C60 (C60) modified silica gels (FMS) as hard templates and resorcinol-formaldehyde (RF) copolymer as carbon precursor. The influence of using the C60 modified template was systematically studied using various physiochemical characterisation techniques in comparison with the unmodified counterpart carbon monolith blank (CM blank). This carbon/carbon monolithic composite, NTCM, possessed a higher specific surface area of 435 m2 g-1 with an integrated open hierarchical porous structure consisting of a tri-modal pore distribution. Due to its high surface area, high pore volume and graphite-like nature, it was used to modify the surfaces of boron doped diamond electrodes for hydrogen peroxide detections. The separation of three phenols on an in-house prepared CM blank column in reversed phase liquid chromatography demonstrated that this type carbon monolith has good selectivity for small polar aromatic compounds and poor separation efficiency due to strong affinity between the analytes and stationary phase. Subsequently, CM blank and NTCM in a rod form were tested as SPE sorbents for phenols adsorption. The adsorption kinetics showed that the CMs had good selectivity with very slow adsorption kinetics and lower adsorption capacity than the other common carbonaceous sorbent reported due to the capillary diffusion effect in the broad cross-section of the sorbents. Then the ground CM blank and NTCM powders were used for the adsorption of methylene blue (MB) in aqueous environment. Their adsorption kinetics, Langmuir isotherms, pH and temperature effects were intensely studied. The overall kinetics of both sorbents in a powder form showed much faster than in the rod form. The experimental results showed ground CM blank was a significantly better sorbent material for MB removal in water than NTCM with good reusability. For obtaining carbon monoliths of required shape for actual applications, CO2 laser ablation in a continuous mode was used to cut two CM blank and NTCM rods under control conditions to produce discs with controlled dimensions. Adsorption studies confirmed the changes in surface chemistry and morphology in these resultant laser cut carbon monolithic discs (LCMs). The results showed laser cut is a good technique for cutting the fragile and porous carbon monoliths with intriguing structure and morphology.
Metadata
Item Type:Thesis (PhD)
Date of Award:November 2014
Refereed:No
Supervisor(s):Brabazon, Dermot, Nesterenko, Ekaterina, Nesterenko, Pavel and Paull, Brett
Subjects:Engineering > Materials
Engineering > Production engineering
Biological Sciences > Microfluidics
Physical Sciences > Chemical detectors
Physical Sciences > Lasers
DCU Faculties and Centres:DCU Faculties and Schools > Faculty of Science and Health > School of Chemical Sciences
Research Initiatives and Centres > Irish Separation Science Cluster (ISSC)
Research Initiatives and Centres > Advanced Processing Technology Research Centre (APTRC)
DCU Faculties and Schools > Faculty of Engineering and Computing > School of Mechanical and Manufacturing Engineering
Research Initiatives and Centres > National Centre for Sensor Research (NCSR)
Use License:This item is licensed under a Creative Commons Attribution-NonCommercial-No Derivative Works 3.0 License. View License
Funders:Science Foundation Ireland
ID Code:19898
Deposited On:27 Nov 2014 14:06 by Dermot Brabazon . Last Modified 02 Mar 2019 04:30
Documents

Full text available as:

[thumbnail of PhD Thesis]
Preview
PDF (PhD Thesis) - Requires a PDF viewer such as GSview, Xpdf or Adobe Acrobat Reader
Creative Commons: Attribution-No Derivative Works 3.0
7MB
Downloads

Downloads

Downloads per month over past year

Archive Staff Only: edit this record